Technicial Specifications
| Power Range | 365-400 bhp (272-298 bkW) 365-400 bhp (272-298 bkW) |
| Speed Range | 1800 rpm 1800 rpm |
| Emissions | Non-Certified Non-Certified |
| Aspiration | TA TA |
| Bore | 5.4 in 137.2 mm |
| Stroke | 6.4 in 165.1 mm |
| Displacement | 893.39 in³ 14.6 l |
| Rotation from Flywheel End | Clockwise Clockwise |
| Configuration | In-line 6, 4-Stroke-Cycle Diesel In-line 6, 4-Stroke-Cycle Diesel |
| Refill Capacity | 34.0 L (9.0 gal) 34.0 L (9.0 gal) |
| Governor | Mechanical Mechanical |
| Oil Change Interval | 250 hrs 250 hrs |
| Cooling | Heat exchanger or keel-cooled Heat exchanger or keel-cooled |
| Length | 57.25 in 1454.2 mm |
| Dry Weight - Approximate | 2921 lb 1325 kg |
| Height | 50.33 in 1278.5 mm |
| Width | 35.96 in 913.5 mm |
Advantages and Features
Key Features & Benefits
- Corrosion resistant aftercooler core and regular duty panel type air cleaner at turbocharger inlet
- Gear-driven centrifugal jacket water pump with expansion tank
- Water-cooled exhaust manifold and turbocharger with round flanged outlet
- Fuel priming pump, transfer pump, and LH serviced filter, flexible lines, and fuel ratio control
- Heavy duty SAE standard rotation tachometer
- LH instrument panel with engine oil pressure, water temperature, and fuel pressure gauges, service meter
- Crankcase breather with right hand Service - oil filter, oil level gauge, and oil filler
- Front & rear supports
- Vibration damper and guard
Standard Equipment
-
Flywheel and Flywheel Housing
- SAE 1 flywheel housing
-
Cooling System
- Keel cooling with jacket water pump
- Expansion tank & connections
-
Exhaust System
- Water cooled manifold
- 6 inch Exhaust flange
-
Air Inlet System
- Turbo and Aftercooler
- Air cleaner
-
Mounting System
- Front & rear supports
-
Charging System
- Charging alternator (12 / 24 V selection)
-
Starting System
- Starting motor (12 / 24 V selection)
Optional Equipment
-
Cooling System
- Sea water pump
- Heat exchanger
-
Fuel System
- Duplex Fuel Filtration
-
General
- Auxiliary Drive
